Vianet Fiber Router Setup | Onu Configurations | Vianet Modem

Vianet Fiber Router Setup – Onu Configurations and a full setup. Follow the guidelines to configure your vianet fiber router. Raisecom HT-803- N.

Related: Mikrotik RB5009

Related: Nokia Fiber Router

Table of Contents

• Vianet superadmin password
• Vianet Fiber Router Setup Tutorial
• Vianet Modem
  • FAQ

Vianet superadmin password

q!w@e#

Vianet Fiber Router Setup Tutorial

Vianet Modem

   Features 

• Feature small size, attractive appearance, and low weight, thus applicable to home use.
• Comply with IEEE 802.11 and China telecom standards.
• Support multiple management modes, such as EMS and Web access, and provide abundant alarms, thus able to reduce the time for locating faults and lower maintenance costs.
• Feature low price, thus able to lower cost on constructing an FTTH network for a single user and applicable to massive deployment.
• Support being pre-configured for different groups of users, thus able to plug and play upon home installation and facilitate service activation, operation, and maintenance.
• Pass carriers’ internet working test and concentrated purchase test, thus able to internet work with other vendors’ OLT.

Dimensions

• 108 mm (Length) × 88 mm (Width) × 31 mm (Height)
• Weight 0.2 kg
• Maximum power consumption < 3 W
• The input of power adapter 100–240 VAC (50/60 Hz)
• The output of power adapter 12 VDC, 0.5 A
• Operating temperature 0–50°C
• Operating humidity (RH) 10%–93% (non-condensing)
• Altitude ≤ 5000 m

   EPON

• Support the OLT in physical, logical, and hybrid authentication.
• Support distance measurement by the OLT.
• Support DBA of the OLT.
• Support triple churning encryption.
• Support optical link DDM and related alarms.
• Support controlling the Tx power of optical modules.
• Ethernet interface Support 10/100 Mbit/s auto-negotiation and 1000 Mbit/s full-duplex and flow control.
• Support statistics of unicast packets, multicast packets, and broadcast packets on the interface.
• Support rate-limiting in the ingress or egress direction of the interface.
• Support configuring MTU to 1518–2030, with the MTU being 1518 by default.
• Support interface-based storm-control over DLF packets, unknown multicast packets, and broadcast packets.
• Support configuring the storm control threshold based on the interface.

   MAC address

• Support MAC addressing learning and aging.
• Support configuring the aging time of MAC addresses.
• Support configuring the MAC address limit.
• Support querying and deleting MAC addresses and adding MAC addresses

 Loop detection

• Support enabling/disabling loop detection.
• Support detecting inner loops, self-loops, and outer loops, and reporting alarms.

  VLAN

• Support IEEE 802.1Q.
• Support 4094 concurrent VLANs.
• Support CTC VLAN modes: transparent transmission, Tag, Trunk, and mapping.
• Support IEEE 802.1ad VLAN Stacking.

 QoS/ACL

• Support classifying Layer 2 traffic by matching fields, such as the destination MAC address, source MAC address, VLAN ID, CoS, and Ethernet type.
• Support classifying Layer 3 traffic by matching fields, such as the destination IPv4 address, source IPv4 address, type of IP protocol, and DSCP.
• Support classifying Layer 4 traffic by matching fields, such as the source TCP port, destination TCP port, source UDP port, and destination TCP port.
• Support configuring actions for traffic classification based on QoS or ACL.
• Support SP or SP+WFQ queue scheduling.

 Multicast

• Support IGMP/MLD Snooping, the transparent transmission of multicast packets, and controllable multicast packets.
• Support configuring multicast VLANs.
• Support multicast immediate leave.

 DHCP

• Support enabling/disabling DHCP Snooping.
• Support DHCP Option 82.

PPPoE Support PPPoE Relay

Maintenance and management

• Support OLT management and Web management.
• Support interface Up/Down alarms.
• Support querying memory utilization and CPU utilization.

TRY FREE UNLIMITED NEPALI VPN

FAQ